OnAir 2000M2 Digital Mixing Console
Date printed: 12.11.03 SW V 4.0 Channel Functions 4-7
Access Permission: Depending on the access permission (see chapter 11) of the user currently
logged in, the functions not available to this user will not be displayed on
the Channel Control page; an example is given below. This user cannot ac-
cess the following parameters:
• PHASE
• AUX 1
• Output summing busses (ΣPROGRAM, ΣRECORD)
• PAN/BAL.
If the user has no access permission at all, the Channel Control page will
not be displayed.