OnAir 2000M2 Digital Mixing Console
5-24 Master Functions SW V 4.0 Date printed: 12.11.03
RESET
START
STOP
5.13.2 Fader Stopwatch
The upper one of the two stopwatches is called the fader stopwatch. It
always restarts at 00:00:00 when a new audio channel is activated (e.g.
channel ON, fader open, and output bus selected). In other words, it dis-
plays the elapsed time of the audio channel opened last.
This function can be enabled or disabled for any desired audio channel via
the MIXER SETUP/SYSTEM CONFIG./INPUT menu, item TIMER
START YES/NO.
The counter stops when the audio channel that has started the stopwatch is
switched OFF, or its fader is closed.
Note: If more than one audio channel has caused the fader stopwatch to restart,
only the last audio channel’s time is displayed.
5.13.3 User Stopwatch
The user stopwatch is located just below the fader stopwatch. It is con-
trolled by two keys on the console’s surface located below the digits of the
display. One key starts and stops the timer, the other resets the timer.
Key Label Description
START Start timer if stopped
STOP Stop timer if running
RESET
Reset timer regardless
whether stopped or running
To Next Page
Loading...
Need help?
General
