OnAir 2000M2 Digital Mixing Console
Date printed: 12.11.03 SW V 4.0 Master Functions 5-21
5.10.3 Users with and without a Password
When a normal user enters the Mixer Setup page before logging-in (which
means he is treated as the default user), he works with the default user's
data. He can LOAD, RECALL, SAVE, or DELETE all of the default user's
data in the console's memory or on the PC-Card. These data can, however,
be used, saved, overwritten, or deleted by any other user who is not logged
in.
The Mixer Setup page offers a PRIVATE field next to the GLOBAL field,
allowing the user – after having logged-in – to access his own, protected
private snapshots and mic settings.
A user can recall his user channel routing in the Mixer Setup page, after
selection of PRIVATE (only one user channel routing can be recalled by
selecting RECALL USER ROUTING); for more information on this sub-
ject please refer to chapter 5.8.2.
Should the user have access permission to the system configuration and/or
channel routing, the corresponding SYSTEM CONF./ROUTING fields
would be displayed here as well.
A user can decide to work with the global data although he is already
logged-in. If the GLOBAL field is touched, the Mixer Setup page will look
as shown below, where he can recall (but not modify) the global snapshots,
mic settings, and channel routings; the CHAN ROUT area is suppressed if
no global channel routings are available. Should the user have access per-
mission to the system configuration and/or channel routing, the corre-
sponding SYSTEM CONF./ROUTING fields would be displayed here as
well.
To Next Page
Loading...
Need help?
General
