GTS Technical Manual
9. April 2021 Edition: V1.00/2021 5-65
Copyright © 2020, Diversey
05.68.23 brush drive - brush belt - 3500µicro_V1.00.fm
Adjustment
Turn the brush motor (4130739) by hand to ensure that the belt is
correctly mounted and stays in the middle of the pulleys.
• Position the brush cover onto the brush drive.
• Position and tighten the 3 screws of the brush cover.
• If needed, complete assembling according to chapter
MOUNTING OF BRUSH DRIVE.
Remarks
Ensure that the brush belt does not touch the cover.
To Next Page
Loading...
