TechnipFMC Sening MultiFlow - Print-Out of Electronic W & M Seal; Electronic Weights & Measures Seal

Sening
®
is a registered trademark of FMC Technologies
117
MN F09 002 US  DOK-383E  Issue/Rev. 3.65 (02/24)
MultiFlow  W&M Calibration
8.5 Print-out of electronic W & M seal
 See the original in the annex, page 112
Electronic Weights &
Measures Seal
as Appendix to
Measurement System Certificate
The seal was produced by:
It is essential to observe the following
instructions when checking the seal
status:
• The seal is not violated by the inspection.
• The opposite seal impression for the
MultiFlow can be repeated with the
following key combination:
Switch on, <F1> (Seal status)
<F1> (Print)
• The code number in the 'Seal status' area
on the copy and on the original must
match (double-sized printing).
• The text under the code number must
read: *The seal is approved!*
• If the details do not match, the seal has
been broken. Appropriate action must be
initiated.
Signature and identification of official:
IMPORTANT:
Illegal modification of the W & M data or
the W & M seal is a punishable offence!
W&M Seal
Serial Number : 16TK0001
Device Number : 18UB0001
Meter Name : Z-4711
Personnel ID : 999999
Report Date
Version
: 06.02.2009 11:45
: 3.54[3.54]GB
*BA7BFA2A*
Setup Count : *000981*
---------------------------------------
Seal Status
Seal Date
Version
Setup Count
Sealed by
: *06.02.2009 11:45*
: *3.54[3.54]GB*
*BA7BFA2A*
: *000981*
: *M-044-C*
---------------------------------------
* The seal is approved!**
---------------------------------------
17.10.2008/10:56 2 Change(s) [999999]
12.01.2009/11:06 3 Change(s) [999999]
12.01.2009/15:38 1 Change(s) [000001]
12.01.2009/13:01 3 Change(s) [999999]
03.02.2009/70:07 1 Change(s) [999999]
03.02.2009/14:43 2 Change(s) [999999]
03.02.2009/11:40 5 Change(s) [999999]
---------------------------------------