6.2 Carrying Out a Discharge (Part 2)
☺ Now the delivery preset screen appears.
The preset screen displays the
last selected product. If another
than the displayed product is
required, you now enter the
desired product code (see
chapter 6.2 "Carrying Out a
Discharge (Part 2)" / page 72).
If the displayed values are not
correct, or if another than the
displayed product is required,
advance to section “Selecting a
New Product”.
☺ If all displayed data is correct, continue with Part 3 of the discharging
operation (chapter 6.5 "Carrying Out a Discharge (Part 3)" / page 79).
6.2.1 Selecting a New Product
To choose a new product you can enter the product code. The product
will then be displayed automatically. If you enter an invalid product
code, you can choose the desired product from the product pages.
Enter the desired product code.
If the product code is not known, an invalid product code (e.g. "99" or
"00") can be entered.
☺ A selection list of all products then appears automatically.
Select a product page.
☺ A suggestion list with all products is displayed.
Select the desired product.
The selection can either be accepted into the discharge settings with the
function keys <F1> or <F2> (Cursor Up / Down) and then <Enter> or by
pressing the number in front of the product.
To Next Page
Loading...
