TechnipFMC Sening MultiFlow - Units

Sening
®
is a registered trademark of FMC Technologies
165
MN F09 002 US  DOK-383E  Issue/Rev. 3.65 (02/24)
MultiFlow  Configuration of the MultiFlow
9.9 Units
 The MultiFlow supports various units, also those which deviate from the
ISO standard. These are mainly US and British gallons. When the unit is
selected, the appropriate conversion factor from the list shown below is
automatically taken into account.
The following units are defined:
Unit
Symbol
Type
Decimal
Places
Conversion Factor
Liter
L*
Fluid
3
1.0
Kilogram
kg
Mass
2
1.0
Pieces
pcs.
Piece
0
1.0
Tons
t
Mass
3
0.001
US gallons
gal
Fluid
2
0.264172
Brit. gallons
gal
Fluid
2
0.219960
Milliliter
mL
Fluid
0
1000.0
Cubic centimeter
cm3
Fluid
0
1000.0
Cubic meter
m3
Fluid
3
0.001
No unit
Piece
0
1.0
* Shown as '  ' in the display, but printed as 'L'.
 All product registers have a reference to the units in which the product is
to be discharged. All characteristics of the units are defined in a table and
an allocation to each product must be made. The units with the assigned
symbols cannot be modified.
The column 'Decimal places' indicates how many places (after the
decimal point) may be used as a maximum for displaying this value.
However, the parameter 'Volume resolution' (3.1.5.1.1) has priority and
may reduce the precision.