TechnipFMC Sening MultiFlow - 11.10 Sensor Monitor Status Report

Sening
®
is a registered trademark of FMC Technologies
239
MN F09 002 US  DOK-383E  Issue/Rev. 3.65 (02/24)
MultiFlow  Printing out Reports
Sample printout of an update report:
11.10 Sensor monitor status report
 The sensor monitor status report can be selected only if the sensor
module support is active.
A printout of the actual status report for the sensor monitor can be
obtained via the "Sensor monitor" menu item (menu 0.1) in the print
menu and/or via "Print" in the "Sensor monitor" menu item (menu 4.8.3).
Update report
Serial number
Device number
Meter des.
Personnel no.
: 00600004
: - ? -
: - ? -
: 000001
Report date
Version
Seal number
: 06.12.2006 13:45
: 5.00[5.00]DE
: 005591
--------------------------------------
Remain. attempts : 25
--------------------------------------
Update progress :
06.12.06/12:54 - 00000000 TEST1
06.12.06/12:56 + EC2F31E2 FAS-SENING
06.12.06/13:08 + EC2F31E2 ABCDEFGHIJ
06.12.06/13:30 - 00000000 ZYXWVUTSRQ
06.12.06/13:36 + EC2F31E2 TEST2
--------------------------------------