TechnipFMC Sening MultiFlow - Operating Options

298
Sening® is a registered trademark of FMC Technologies
MN F09 002 US  DOK-383E  Issue/Rev. 3.65 (02/24)
MultiFlow  Address and contact details
Operating Options
No.
Name
Seal
K
Factory
Setting
Meaning
3.1.4
Operating Options
3
3.1.4.1
Operating Mode
M
3
0 (Standard)
Selection of operating mode:
1 Standard, support of single and multiple metering
systems
2 TMC mode, single and multiple metering systems
in conjunction with a TMC
3 OBC mode, single and multiple metering systems
in conjunction with an OBC
4 Like TMC mode, manual operation is
disabled (remote mode)
5 Like OBC mode, manual operation is
disabled (remote mode)
3.1.4.2
Save display
M
3
15
The discharged volume is saved in the display for the
selected time in minutes. Thereafter, the ready
screen is displayed again.
3.1.4.3
Currency Options
3
3.1.4.3.1
Applicable Currency
M
3
0
(Currency A)
Selection of applicable currency (A or B). All preset
prices, billing and driver input data are computed in
this currency.
Reference to the second currency can only be made
additionally at the end of the receipt/bill
(see EURO).
3.1.4.3 2
Exchange Rate
M
3
1.92573
Exchange rate between currencies A+B
3.1.4.3.3
Curr. Symbol
Position
M
3
0 (after)
Determines the position of the currency symbol in
printouts, i.e. before or after the amount
3.1.4.3.4
Currency Symbol A
M
3
£
Symbol used for currency A
3.1.4.3.5
Curr. Resolution A
M
3
2
Number of post-decimal places for curr. A
3.1.4.3.6
Currency Symbol B
M
3
EUR
Symbol used for currency B
3.1.4.3.7
Curr. Resolution B
M
3
2
Number of post-decimal places for curr. B
3.1.4.3.8
Resolution product
price
M
3
5
Number of post-decimal places for product prices
3.1.4.4
Pre-set
3.1.4.4.1
Standard pre-set
D
x
Country
specific
Standard delivery quantity. Displayed in the delivery
screen as standard value (pre-set)
3.1.4.4.2
Pre-set type
D
x
0 (comp)
Standard delivery quantity is compensated (0) or
uncompensated (1)
3.1.4.5
Queries
3.1.4.5.1
Driver ID Query
M
3
0 (no)
Activates the automatic driver logon (password
query) after switch-on.
3.1.4.5.2
Language Query
M
3
0 (no)
Activates the automatic query for the customer's
language before discharge.
3.1.4.5.3
Customer ID Query
M
3
0 (no)
Activates the customer's ID query for deliveries.
3.1.4.5.4
Customer Type
Query
M
3
1 (yes)
Activates the customer type query (business or
private) which determines whether prices are net or
gross.
When deactivated, the value of parameter 3.1.4.0.1 is
considered automatically.
3.1.4.5.5
Other Products
M
3
1 (yes)
Activates the option to add several products to a
delivery (e.g. bulk goods).
When deactivated, only one product can be delivered
on one receipt.
3.1.4.5.6
Payment Mode
M
3
0 (no)
Activates the payment mode query after printing of
invoices.
3.1.4.5.7
Receipt copy
M
3
0 (no)