Final total Meter
Tour
------------------------------------------
Liquids VT L 6472
5270
Vo L 6419
5227
Additives L 0,00
0.00
-End of List-
•
Flow rate
-
Unmetered (1/2)
-
Wet hose (1/2)
-
Dry hose (1/2)
-
Dry hose G (S) (Gravity discharge)
-
Dry hose P (Pumped)
-
Bypass (1/2)
Average flow rate during discharge
(L / min)
☺ The relevant volume for the respective
discharge (VT for temperature-
uncompensated measurement of the
delivered volume, V0 for compensated
measurement) is marked with a plus sign
(+). In the case of bulk goods the
delivered quantity is displayed in column
VT.
Block 2
forms the cumulative block. Here the sums of all the
products delivered in the time covered by the report
are listed.
Block 3
shows the cumulative values of the measuring
system (daily and total sums).
11.4 Copy Receipt
•
If a receipt is lost or has become contaminated or illegible because
the ink ribbon was worn out, you can repeat this printout at any time
with the function Copy receipt.
•
The addition "Copy" is printed on the receipt to differentiate from the
original.
11.5 Zero Bill
•
A blank receipt is printed out with the function Zero Bill.
•
With this receipt you prove that the MultiFlow is in the standby mode
and not in the discharge mode already.
•
The receipt counter is not incremented.
To Next Page
Loading...
