TechnipFMC Sening MultiFlow - Update Report (Example)

238
Sening® is a registered trademark of FMC Technologies
MN F09 002 US  DOK-383E  Issue/Rev. 3.65 (02/24)
MultiFlow  Printing out Reports
Delivery data / EMIS -> Office
 Once the local data transfer
from the MultiFlow to the EMIS
is complete the EMIS starts to
transfer the data to the office
interface (e.g. FTP server). The
EMIS requires some time for
the transfer because a
GSM/GPRS connection is
created for this purpose. The
MultiFlow receives feedback
from the EMIS about any
connection problems and/or is
notified of the end of the
transfer.
☺ The following message appears after the data transfer is complete:
“Successful data transmission!”
11.9 Update report (example)
 The following description is relevant only for program versions 5.00 and
higher (approval according to MID).
 A printout of the current update report can be obtained via the "Update
report" menu item (menu 4.6.3).
This report contains general information and also the number of
remaining available downloads attempts. The "Update progress" section
contains a list of all software downloads started or executed so far along
with date, time, status (‘ -` = incomplete download, `+` = complete
download), checksum and user ID.
Del iv er y da ta
Dat a tr an sm is si on
EMI S - > Of fi ce
P le as e
wa it
...
- --
-- -
-- -