9.3.1.4.2.3
Currency Symbol Before Amount
In some countries the currency symbol is placed before the amount (e.g.
in England and the USA). This can be set via parameter 3.1.4.3.3
(“Position symbol”).
9.3.1.4.2.4
Currency Resolution / Rounding Rules
Some currencies do not have sub-units such as “cents” in Germany. With
these currencies, no decimal places occur in the amounts.
The parameter “Currency resolution” enables these facts to be taken into
account when configuring the MultiFlow. The parameter states how many
decimal places are to be taken into account in representing the amounts.
9.3.1.4.2.5
Resolution of product price
The user can define the number of decimal places for the product price
using the parameter "Resolution of product price".
9.3.1.4.3
Notes on pre-set options
The user has the opportunity to define both the pre-set quantity as well as
the pre-set type. The "Standard pre-set" menu item (menu 3.1.4.4.1) is
used to set the standard delivery quantity (pre-set). This is the delivery
quantity value suggested by the MultiFlow at each delivery. The "Pre-set
type" menu item (menu 3.1.4.4.2) is used to define whether this standard
delivery quantity is a compensated (0) or an uncompensated (1) volume.
9.3.1.4.4
Notes on Query Options
The MultiFlow supports a range of optional queries which enable the
operator to adapt the program sequence to his daily routine.
If the driver number is to be
always queried after switching
on the MultiFlow, then the
parameter Driver no. query
must be set to 1.
Querying the driver number
is useful if a vehicle may be
driven by different drivers.
The driver number is then
used, for example, to control
the printout of the name on
the ticket and an
unambiguous assignment of
the deliveries can be made
to each driver.
To Next Page
Loading...
