TechnipFMC Sening MultiFlow - Page 2

MN F09 002 US  DOK-383E  Issue/Rev 3.65 (02/24)
MultiFlow  General
Sening
®
is a registered trademark of TechnipFMC
2
Further documentation for this product:
Description
Order No.
MultiFlow Quick Guide
MN F09 012 US / DOK-392E
MultiFlow Calibration – Information for W&M Inspector
MN F09 010 US / DOK-389E
History
Revision
Date
Editor
Status
Description
Rev. 1.00
June 2003
HO
released
- first edition
Rev. 3.54
April 2009
GE / RL / jp
released
- format modifications / new Drawings
- update Version 3.54
Rev. 3.55
September 2009
GE / RL / jp
released
- Upgrading of the Technical Data Chapter 12
by line Functional safety
Rev. 3.56
July 2010
GE / RL / jp
released
- Updated Drawings:
61.352108 / 61.352110 / 61.351763 / 61.351771
Rev. 3.57
August 2010
JS / jp
released
- New Drawings:
61.352218 / 61.352217 (variant 4)
- New chapter:
2.6 Safety instructions
Rev. 3.58
February 2011
JS / jp
released
- Description new
Software Version 3.59 u. 5.02 (MID)
Rev. 3.60
September 2011
RLE / jp
released
- Description new
Software Version 3.60 u. 5.11 (MID)
- Remove turbines and multi-IO support
Rev. 3.61
July 2012
RLE / jp
released
- Description new
Software Version 3.61 u. 5.12 (MID)
- Transfer logbook data to EMIS2
- MFSI query configuration via EMIS2
Rev. 3.62
March 2013
RLE / jp / elf
released
- Editorial changes
- New Tally printer MIP480
- Complete parameter list included
- Maintenance plan added
Rev 3.63
March 2020
J.S.
released
- New logo
- Update of Seal report
- Update Ex-data
Rev 3.64
February 2023
RLE
released
- CO2KostAufG
- FMC Technologies -> TechnipFMC
- Program versions updated
Rev. 3.65
June 2023
RLE
released
- CO2KostAufG modified
- Order number max 10 characters