TechnipFMC Sening MultiFlow - Page 238

242
Sening® is a registered trademark of FMC Technologies
MN F09 002 US  DOK-383E  Issue/Rev. 3.65 (02/24)
MultiFlow  Printing out Reports
Parameter
Description
Valid values
S: v(w)
Condition description
v: logic condition
w: interpretation of condition
dependent on sensor
v: 0: logic unit 0
1: logic unit 1
2: interruption
3: short-circuit
w: akt (active)
pas (passive)
ubr (interruption)
krz (short-circuit)
Example:
SI:040309-133011 M:ON I:20(7-1) S:1(akt)
Date: 04.03.2009, 13:30:11
Online event
MFSI input 20, sensor: hand-brake, index:1
At the input there is a logic unit 1. One closing device was used which
is now ACTIVE.
SI:040309-141532 M:OFF I:16(1-3) S:0(pas)
Date: 04.03.2009, 14:15:32
Offline event
MFSI input 16, sensor: dome top, index: 3
At the input there is a logic unit 0. One closing device was used which
is now PASSIVE.