TechnipFMC Sening MultiFlow - Page 272

276
Sening® is a registered trademark of FMC Technologies
MN F09 002 US  DOK-383E  Issue/Rev. 3.65 (02/24)
MultiFlow  Miscellaneous Information
14.9.35 Version 5.20 (MID)
• Modified float monitoring for EPE2-AI
• Backflow detection for paused deliveries
14.9.36 Version 5.21 (MID)
• Optimized handling for OBC preset in combination with pressing 2* „Vol+“ at
MC2/3
• Modified handling for backflow at manual draing the meter
• „LT“ Variant available
• „ES“ Variant available
14.9.37 Version 5.22 (MID)
• New AD converter
14.9.38 Version 5.23 (MID)
• Optimized menu for meter draining (3.1.8.5.1)
• Flash-Download with new AD converter electronics (5.08[5.23])
14.9.39 Version 5.24 (MID)
• Optimized startup handling for electronics with new AD converter
14.9.40 Version 5.25 (MID)
• Optimized logbook request from EMISx
14.9.41 Version 5.26 (MID)
• FTL - Offline-Sensor events encapsulated in Start- (‚63‘) and Stop-Record (‚64‘)
14.9.42 Version 5.27 (MID)
• StartUp-Screen "TechnipFMC"
• Timestamp in EVE-FTL-Data modified (TruckEye)
• „IL“ Variant available (requires Display-SW >=3.04)
• Carbon Dioxide Cost Allocation Act (CO2KostAufG)
14.9.43 Version 5.28 (MID)
• Order number max 10 characters