TechnipFMC Sening MultiFlow - Page 277

Sening
®
is a registered trademark of FMC Technologies
281
MN F09 002 US  DOK-383E  Issue/Rev. 3.65 (02/24)
MultiFlow  Software update
 Download will take about 5 minutes.
The progress of download is visible through the blue bar at the bottom of
the window.
 Finish download program by clicking the button ‘Abbrechen’.
 Switch off MultiFlow, connect printer.
 Switch on and initialize MultiFlow (parameter 4.4).
 Read out parameter from chip card (parameter 4.5.1).
 Print and compare parameter list.