TechnipFMC Sening MultiFlow - Page 315

MN F09 002 US  DOK-383E  Issue/Rev. 3.65 (02/24)
MultiFlow  Address and contact details
Sening
®
is a registered trademark of FMC Technologies
317
No.
Name
Seal
K
Factory
setting
Meaning
7.1
Chip card
F
Saving a trip report to a chip card.
7.2
Office transfer
F
7.2.1
Delivery data
F
Only available in combination with an EMIS. Transfer
of delivery data to the EMIS. Selection can be made
according to time or receipt number.
7.2.2
Event data
F
Only available in combination with an EMIS. Transfer
of selected event data to the EMIS. Selection can be
time-related.
7.2.3
Sensor monitoring
F
Only available in combination with an EMIS. Transfer
of selected sensor-specific data to the EMIS.
Selection can be time-related.
8
Reserved
9
Reserved
0
Other
0.1
Sensor monitor
F
Available reports about the sensor interface
0.1.1
Status
F
Report about the current sensor monitor status. Menu
item is only available when the sensor interface is
active.
0.1.2
Event report
F
Print extract from the logbook in accordance with
selected time frame. Contains only sensor events.
0.2
Program update
Available reports about the Program-Update
(only MID)
0.2.1
Update report
F
Performed program updates (only MID)