EasyManua.ls Logo

TechnipFMC Sening MultiFlow - Page 32

TechnipFMC Sening MultiFlow
356 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
Sening® is a registered trademark of FMC Technologies
MN F09 002 US  DOK-383E  Issue/Rev. 3.65 (02/24)
MultiFlow  General Installation Instructions
Make sure that no fuel is allowed to soak or flow into the ground!
3.6.3
Operating elements
CAUTION:
Do not open the housing cover when the unit is connected to the
voltage supply!
Work must only be carried out on the Ex-e terminals when the unit is
voltage free. National regulations must be satisfied when operation of
this unit is begun. When performing operational checks, observe the
guidelines laid out in IEC/EN 60 079-17.
3.6.4
Disposal
It is the operator’s responsibility to obtain the necessary information
about all relevant regulations and requirements from your local
authorities. Ensure that the relevant materials are disposed of in an
environmentally safe fashion.
§ The operator is responsible for ensuring compliance with all general and
local regulations which are in force at the time of disposal.
3.6.4.1
Disposal of production materials and auxiliary materials
Mineral oil products are extremely hazardous to the environment; they
must not be allowed to enter the drains/sewage system or the ground.
These materials and any objects contaminated with them should be
disposed of via suitable waste disposal facilities.
Disposal of batteries
The batteries in the controller should be replaced by a skilled person.
Used batteries must not be disposed of as standard domestic waste.
Ensure that all used batteries are disposed of via suitable disposal
facilities.
3.6.4.2
Disposal of a functional component or system
When a functional component or system is taken out of service, we
recommend that it should be sorted into its different types of waste and
then disposed of or recycled as appropriate. Sort and separate iron,
nonferrous metals, plastics, electronic waste, etc.

Table of Contents

Related product manuals