The preset quantity, compensation mode, product and discharged
amount (in double size characters) are displayed on the screen.
By pressing the <F3> key you can switch between different displays.
The following displays are available:
A kt . Te mp .: +1 3. 7 °C
w . V AT . 67 .4 5 £
/m in 7 03
-- - - -- >>
Ave ra ge +1 1. 2 °C
VT 54 8, 4
V15 55 5, 1
-- - - -- >>
The third page shows the values for the additive dispensing. The
display includes the name of the additive used, the discharged amount
and the mixing ratio.
Add . Bu rn y
Vol um e: 25 0 m
Rat io : 1 / 20 00
10: 22 De li ve ry s ta rt
10. 47 De li ve ry e nd
Pri nt ou t fi ni sh ed
A fourth page provides general information about the last three actions
carried out.
or
preset
amount
reached
You can interrupt the discharge with <Stop>. To continue the discharge
press the <Start> key, or press the <Stop> key a second time to
irrevocably terminate the discharge.
However, if the preset amount has been reached, then the MultiFlow
automatically interrupts discharge and "Resume discharge?"
appears in the display.
If the discharge is to be continued (press <F1> for "Yes"), then the
additional amount to be discharged must be entered.
The discharge is continued with <Start> after entering the amount. The
entered amount is added to the amount already discharged, the total is
now displayed as preset amount.
If you want to discontinue discharging, press the function key
<F2> for "No".
When the preset amount has been reached or the discharge terminated
with <Stop>, other products (no metered products in Germany) can be
added to the delivery after pressing <Stop> again.
Step 4: Press the <Stop> key.
The query "More products?" is answered with the function key
<F1> for "Yes".
Then the entry mask with the product code and the price is displayed.
Enter the amount. You can also change to a packed good (additive),
and the price can be changed.
To Next Page
Loading...
