Fig.1: MultiFlow emergency power supply MF-EPS
Use of emergency power supply:
To be used only if the
delivery is interrupted by a
power failure in order to
display the most recent
delivery value.
START:
Press power failure switch to
ON position.
STOP:
Automatic stop after 2 min.
or press power failure switch
to OFF position.
Battery test:
Press power failure switch to ON position when the power supply is on:
"Battery good" must light up.
Wiring diagrams for MF-EPS see "E51.352078- Emergency power
supply MF-EPS" / p. 339
To Next Page
Loading...
