TechnipFMC Sening MultiFlow - Page 87

MN F09 002 US  DOK-383E  Issue/Rev. 3.65 (02/24)
MultiFlow  Discharge
Sening
®
is a registered trademark of FMC Technologies
93
Remove batteries
CAUTION: Take care not to damage the clamps!
Notes
Disposal of batteries
The batteries in this unit should be replaced by skilled personnel only.
Used batteries must not be disposed of as standard domestic waste.
Ensure that all used batteries are disposed of via suitable disposal
facilities.
7
Lift the battery slightly
with a screwdriver
8
and pull gently upwards and forwards to
remove.