Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 1017 of 1039 2021-09-23
Not Subject to NDA
<ReqActiveTime>
string
-
one byte in an 8 bit format.
Requested Active Time
value (T3324) to be allocated
to the UE. The requested
Active Time value is coded
as one byte (octet 3) of the
GPRS Timer 2 information
element coded as bit format
(e.g. "00100100" equals 4
minutes). For the coding
and the value range, see the
GPRS Timer 2 IE in 3GPP TS
24.008.
A special form of the command can be given as AT+CPSMS= (with all
parameters omitted). In this form, the parameter <mode> will be set to 0,
the use of PSM will be disabled and data for all parameters in command
+CPSMS will be removed or, if available, set to the manufacturer specific
default values.
CPSMS configuration is saved in the file system
AT+CPSMS?
Read command returns the current CPSMS configuration, in the format:
+CPSMS:<mode>,[<ReqPeriodicRAU>],[<ReqGPRSreadyTimer>],[<ReqPeriodicTAU
>], [<ReqActiveTime>]
AT+CPSMS=?
Test command reports the range for the parameters in the format:
+CPSMS:(list of supported <mode>s),(list of supported <ReqPeriodicRAU>s),(list of
supported <ReqGPRSreadyTimer>s),(list of supported <ReqPeriodicTAU>s),(list of
supported <ReqActiveTime>s)

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English