M2M 855
3.23.1. AT#M2MCHDIR - M2M File System Change Current
Directory 855
3.23.2. AT#M2MMKDIR - M2M File System Make Directory 857
3.23.3. AT#M2MBACKUP - M2M Set Backup Feature 859
3.23.4. AT#M2MRMDIR - M2M File System Remove Directory 861
3.23.5. AT+M2M - Enable/disable M2M Application execution 863
3.23.6. AT#M2MRUN - M2M Set Run File Permission 865
3.23.7. AT#M2MDEL - M2M Delete File 872
3.23.8. AT#M2MWRITE - M2M Write a File 874
3.23.9. AT#M2MLIST - M2M File System List 876
3.23.10. AT#M2MREAD - M2M Read File 879
3.23.11. AT#M2MREADEXT - M2M Read File Extended 881
3.23.12. AT#M2MRAM - AppZone RAM Info 884
3.23.13. AT#M2MARG - M2M Set Arguments 885
MQTT 888
3.24.1. AT#MQEN - Enable MQTT Feature 888
3.24.2. AT#MQCFG - Configure MQTT Parameters 890
3.24.3. AT#MQDISC - Log Out and Disconnect from the MQTT Broker
893
3.24.4. AT#MQCONN - Connect and Log in the MQTT Broker 894
3.24.5. AT#MQCFG2 - Configure Additional MQTT Parameters 897
3.24.6. AT#MQWCFG - Configure MQTT Last Will and Testament 899
3.24.7. AT#MQUNS - Unsubscribe from a Topic 902
3.24.8. AT#MQTCFG - Configure Timeout Parameters for MQTT
Transmission 903
3.24.9. AT#MQSUB - Subscribe to a Topic 905
3.24.10. AT#MQPUBS - Publish ASCII String 907
3.24.11. AT#MQREAD - Read Messages Received from the MQTT
Broker 909
3.24.12. MQTT-SN 912
3.24.12.1. AT#MQSNEN - Enable MQTT-SN feature 912
3.24.12.2. AT#MQSNCFG2 - Configure additional MQTT-SN parameters914
To Next Page
Loading...
Need help?
General
