Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 309 of 1039 2021-09-23
Not Subject to NDA
128
:
both the type of number and the
numbering plan are unknown
129
:
unknown type of number and
ISDN/Telephony numbering plan
145
:
international type of number and
ISDN/Telephony numbering plan
(contains the character "+")
<alpha>
string
alphanumeric representation of <number>
corresponding to the entry found in phonebook;
used character set should be the one selected
with command +CSCS
<CLI_validity>
integer
validity of CLIP
Values:
0
:
CLI valid
1
:
CLI has been withheld by the originator
2
:
CLI is not available due to interworking
problems or limitation or originating
network
In the +CLIP: response they are currently not reported either the
subaddress information (it's always "" after the 2nd comma) and
the subaddress type information (it's always 128 after the 3rd
comma)
The command changes only the report behavior of the device, it
does not change CLI supplementary service setting on the network.
AT+CLIP?
Read command returns the presentation status of the CLI in the format:
+CLIP: <enable>,<m>
Additional info:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English