Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 310 of 1039 2021-09-23
Not Subject to NDA
Parameters:
Name
Type
Default
Description
<enable>
integer
N/A
status of the local setting
Values:
0
:
CLI presentation disabled
1
:
CLI presentation enabled
<m>
integer
N/A
status of the CLIP service on the
GSM network.
Values:
0
:
CLIP not provisioned
1
:
CLIP provisioned
2
:
unknown (e.g. no network is present)
This command issues a status request to the network, hence it
may take a few seconds to give the answer due to the time needed
to exchange data with it.
AT+CLIP=?
Test command returns the supported values of parameter <enable>
Modules Supporting the command
ME310G1-
WWV
ME910G1-
WWV
ML865G1-
WW voice

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English