5-40 4181383 First Edition
HYDROSTATIC POWER TRAIN
5
Installation Notes
• Install the rear wheel motor by reversing the order of
removal.
• Apply anti-seize compound to the motor shaft
threads (10). Be careful not to apply anti-seize
compound to the motor shaft.
• Install a new cotter pin (8) in castle nut (7) and motor
shaft (10).
• Pressure filter traction system upon startup if metal
debris is found in system oil or motor. (See “Portable
In-Line Filter” on page 5-2.)
• Check hydraulic oil level. Add oil as needed. (Refer to
“Safety, Operation, and Maintenance Manual” for the
correct oil specifications.)
Required Materials
Anti-Seize Compound
To Next Page
Loading...
