EasyManuals Logo

Textron Jacobsen AR-5 Technical/Repair Manual

Textron Jacobsen AR-5
295 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #255 background imageLoading...
Page #255 background image
CUTTING UNITS
4181383 First Edition 8-7
8
Scalping
NOTE: Arrow indicates direction of travel.
Scalping is a condition in which areas of grass are cut
noticeably shorter than the surrounding areas, resulting in
a light green or even brown patch. This is usually caused
by an excessively low height-of-cut setting and/or uneven
turf.
Probable Cause Remedy
HOC (height-of-cut) settings are lower than normal. Check and adjust the HOC settings. (Refer to “Safety, Operation,
and Maintenance Manual.”)
Turf too uneven for the mower to follow. Change mowing direction.
Cutting too much grass at one time. Mow more often.
Mowing (ground) speed is too fast. Reduce mowing (ground) speed.
TN0222

Table of Contents

Other manuals for Textron Jacobsen AR-5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Textron Jacobsen AR-5 and is the answer not in the manual?

Textron Jacobsen AR-5 Specifications

General IconGeneral
BrandTextron
ModelJacobsen AR-5
CategoryLawn Mower
LanguageEnglish

Related product manuals