ELECTRICAL
4181383 First Edition 4-39
4
Hydraulic Oil Level Light
When the hydraulic level switch closes, voltage is
provided to control module hydraulic oil level switch input
terminal J1-1, activating the input. With the input
activated and after a 5 second delay, the control module
hydraulic oil level light output terminal J2-9 provides a
ground to the hydraulic oil level light, turning on the light.
At the same time the control module does not allow the
mow circuit to operate and sounds the horn for 5 seconds
and then chirps every 3 seconds.
To Next Page
Loading...
Need help?
General
