THOMSON Amethyst III User Manual

Appendix C ’Safety Instructions’ — Danger
Amethyst III DTV Smart Switch 263
User Manual
Danger
The following warning statements identify conditions
or practices that can result in personal injury or loss of
life.
Mains Power Safety Instructions
RELIABLE EARTHING — The product is designed for connection to an
earth-grounded AC outlet and must be correctly earthed through the
main outlet of cable. To avoid risk of electrical shock or equipment
damage, do not disconnect the grounding plug.
AC MAINS POWER CORD — AC mains cords are not shipped with
equipment. You must use mains cords as described in
Section ’Power
Supply and Protective Ground’
on page 45. The mains power cords
should comply with the legislation in force in the country of installation.
MAINS POWER/CIRCUIT OVERLOADING — For each branch circuit, the
connection panel should feature overload and earth fault protection and
a bipolar cut-off device or a differential circuit breaker.
MAINS POWER/CONNECTION PANEL — The connection panel should
comply with the legislation in force in the country of installation.
Connection panel position in the rack must ensure that plugs and power
cords are within easy reach for switching off purposes.
OVERLOAD PROTECTION — Power supply unit has integrated overload
protection which cannot be accessed or reset. In the event of a
malfunction, please contact the Thomson Video Networks
Customer
Services Department.
POWER DISCONNECTING — The equipment may or does feature more
than one power supply cords. To reduce the risk of electric shock,
disconnect all power supply cords before any intervention.
Rack Mount Safety Instructions
ELEVATED OPERATING AMBIENT — If installed in a closed or multi-unit
rack assembly, the operating air ambient temperature of the rack
environment may be greater than room ambient. Provide proper
ventilation as described in
Section ’Mounting in Rack’ on page 42 to
keep the equipment in an environment compatible with the maximum
operating temperature specified by the
manufacturer.
MECHANICAL LOADING — Mounting of the equipment in the rack
should be such that a hazardous condition is not achieved due to uneven
mechanical loading.

THOMSON Amethyst III Specifications

General

Brand	THOMSON
Model	Amethyst III
Category	Switch
Language	English