THOMSON Amethyst III - Page 286

Appendix F ’Alarms’
286 Amethyst III DTV Smart Switch
User Manual
ALARM
CODE
ALARM
NAME
ALARM
TEXT
ALARM
SEVERITY
0x103 HARDWARE_FAILURE Hardware failure %param%integer% Error
0x105 FAN_FAILURE_EAGLE Fan %param%integer% failure Error
0x106 BATTERY_FAILURE Battery failure Error
0x107 POWER_FAILURE Power failure Error
0x108 TEMP_FAILURE Temperature failure configurable
0x109 CFLASH_MISSING Compact flash is missing Error
0x10A ACQUISITION_BOARD_FAILURE Acquisition board failure type
%param%integer
% slot
%param%integer
% code
%param%integer
%
Error
0x10B HARDWARE_FAILURE_TYPE2 Hardware failure %param%integer%
- %param%integer%
Error
0x10C UNCONSISTENT_HARDWARE_S
ETUP
Inconsistent hardware setup
(%param%string%)
Error
0x203 INPUT_DISCONNECTED Input disconnected Error
0x204 INPUT_NO_DATA Input no data Warning
0x205 INPUT_DATA_OVERFLOW Input bit rate %param%integer%
exceed the configured rate
%param%integer%
Error
0x209 INPUT_PACKET_LOST Input %param%integer% packet lost Warning
0x20A ETHERNET_LINK_DOWN Ethernet link down Error
0x20B ETHERNET_LINK_UP Ethernet link up Info
0x20C PAIR_SWITCH_STATUS %param%string% is on air for the
pair of inputs (
%param%string%,
%param%string%)
Info
0x20D PAIR_SYNC_LOST Synchronization lost on pair of
inputs (
%param%string%,
%param%string%
)
Error
0x20F SECTION_BAD_CRC Bad section CRC on input
%param%integer%, PID
%param%integer%
Warning
0x212 INPUT_AVAILABLE Input is available Info
0x217 NO_IP_DATA No %param%string% IP received
%param%ipv4%
Info
0x21C CC_ERROR Continuity counter error:
%param%string%
Error
0x2FF GENERIC_ERROR %param%string% Error
0x302 EQUIPMENT_IS_OFF Equipment is off Info
0x304 NEW_CONF Configuration '%param%string%'
activated by
%param%string%
Info