THOMSON TG605s - Dhcp Client Rqoptions Delete

dhcp Commands
E-DOC-CTC-20080409-0002 v2.0
143
dhcp client rqoptions delete
Delete a DHCP Option Code from the Parameter Request List.
SYNTAX:
dhcp client rqoptions delete intf = <{wan1}>
option = <{subnet-mask|time-offset|default-
routers|time-servers|ien116-name-impress-
servers|resource-location-servers|host-
name|boot-file-size|merit-dump|domain-name|
swap-server|root-path|extensions-path|ip-
forwarding|non-local-source-routing|policy-
filter|max-dgram-reassembly|default-ip-ttl|
path-mtu-aging-timeout|path-mtu-plateau-table|
interface-mtu|all-subnets-local|broadcast-
address|perform-mask-discovery|...} or number>
where:
intf The name of the interface on which a DHCP
Client is defined.
REQUIRED
option The name or number of the option. REQUIRED