THOMSON TG605s - Xdsl Debug Lloopback

xdsl Commands
E-DOC-CTC-20080409-0002 v2.0
953
xdsl debug lloopback
Configure Local Loopback (applies to CPE mode only).
SYNTAX:
xdsl debug lloopback enabled = <{no|yes}>
[timeout = <number{0-1000}>]
[type = <{digital|analog}>]
where:
enabled Enable / disable the Local Loopback. REQUIRED
timeout Local Loopback timeout: 0..1000 (min). OPTIONAL
type Local Loopback type. OPTIONAL