THOMSON TG605s - Ipsec Connection Options Modify

ipsec Commands
E-DOC-CTC-20080409-0002 v2.0
581
ipsec connection options modify
Changes a connection options group.
SYNTAX:
ipsec connection options
modify
name = <>
[virtual_if = <string>]
[force_df = <{pass|force_set|force_clear}>]
[min_mtu = <number{0-1432}>]
[add_route = <{enabled|disabled}>]
[routed = <{enabled|disabled}>]
where:
name The name of the connection options group to
change.
REQUIRED
virtual_if Virtual interface name. OPTIONAL
force_df DF bit copy behavior. OPTIONAL
min_mtu Minimum MTU for this SA. OPTIONAL
add_route Add a route for this connection. OPTIONAL
routed Should this connection be routed OPTIONAL