connection Commands
E-DOC-CTC-20080409-0002 v2.0
99
connection appinfo
Display CONN/NAT application specific info
SYNTAX:
connection appinfo application = <{IP6TO4|PPTP|ESP|IKE|SIP|
JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|ILS|H245|
H323|IRC|GAME(UDP)|CONE(UDP)|LOOSE(UDP)|FTP}>
where:
application The name of a CONN/NAT application helper as
listed by ':connection applist'.
REQUIRED
To Next Page
Loading...
