THOMSON TG605s - Grp Rip Rtfadd

grp Commands
E-DOC-CTC-20080409-0002 v2.0
443
grp rip rtfadd
Add a route filter to the RIP route filter list.
SYNTAX:
grp rip rtfadd addr = <ip-address>
[netmask = <ip-mask(dotted or cidr)>]
direction = <{incoming|outgoing}>
intf = <{None|guest1|dmz1|wan1|lan1|ipsec0}>
where:
addr The IP network address which must be filtered
out.
REQUIRED
netmask The subnetmask associated with this address. OPTIONAL
direction Specify if the filtering must be applied to
incoming or ougoing packets.
REQUIRED
intf The name of the interface to which the filtering
must be applied.
REQUIRED