atm Commands
54
E-DOC-CTC-20080409-0002 v2.0
atm debug traceconfig
Display/Modify AAL5 debug trace configuration.
SYNTAX:
atm debug traceconfig [len = <number>]
[intf = <{atm_8_35|atm_0_35|atm_0_32}>]
[state = <{disabled|enabled}>]
where:
len Maximum number of AAL5 payload bytes that
will be shown (0-2000, global setting).
OPTIONAL
intf The name of the ATM interface to configure. OPTIONAL
state Enable/disable AAL5 debug tracing. OPTIONAL
To Next Page
Loading...
