grp Commands
448
E-DOC-CTC-20080409-0002 v2.0
grp rttadd
Add a translation rule to the grp route translation list.
SYNTAX:
grp rttadd dst = <ip-address>
[dstmsk = <ip-mask(dotted or cidr)>]
tdst = <ip-address>
[tdstmsk = <ip-mask(dotted or cidr)>]
rttype = <{kernel|connect|rip}>
intf = <{None|guest1|dmz1|wan1|lan1|ipsec0|
loop}>
where:
dst The destination IP address which has to be
translated. Supports ip/mask notation.
REQUIRED
dstmsk The destination IP address mask. OPTIONAL
tdst The translated destination IP address. Supports
ip/mask notation.
REQUIRED
tdstmsk The translated destination IP address mask. OPTIONAL
rttype The route type which has to be translated. REQUIRED
intf The name of the interface to which the
translation rule must be applied.
REQUIRED
To Next Page
Loading...
