THOMSON TG605s - Atm Commands

atm Commands
E-DOC-CTC-20080409-0002 v2.0
35
atm Commands
atm bundle add Add a new bundle of interfaces. see page 37
atm bundle attach Attach a bundle of interfaces. see page 38
atm bundle clear Clear bundle statistics. see page 39
atm bundle config Modify a bundle of interfaces. see page 40
atm bundle delete Delete a bundle of interfaces. see page 41
atm bundle detach Detach a bundle of interfaces. see page 42
atm bundle flush Flush all bundles. see page 43
atm bundle ifadd Add an interface on a bundle. see page 44
atm bundle ifconfig Configure an interface from a bundle. see page 45
atm bundle ifdelete Remove an interface from a bundle. see page 46
atm bundle list Display the current bundles. see page 47
atm cac config Configure ATM connection admission
control.
see page 48
atm cac list List all CAC parameters. see page 49
atm cac overbooking Configure ATM overbooking
parameters.
see page 50
atm debug aal5stats Display AAL5 port specific atm
statistics.
see page 51
atm debug gstats Display ATM global statistics. see page 52
atm debug portstats Display port specific atm statistics. see page 53
atm debug traceconfig Display/Modify AAL5 debug trace
configuration.
see page 54
atm flush Flush all ATM interfaces. see page 55
atm ifadd Create a new ATM interface. see page 56
atm ifattach Attach an ATM interface. see page 57
atm ifconfig Modify an ATM interface. see page 58
atm ifdelete Delete an ATM interface. see page 59
atm ifdetach Detach an ATM interface. see page 60
atm iflist Display the ATM interfaces. see page 61
atm oam cc list Display CC configuration. see page 62