THOMSON TG605s - Connection Appconfig

connection Commands
98
E-DOC-CTC-20080409-0002 v2.0
connection appconfig
Modify a CONN/NAT application helper configuration
SYNTAX:
connection appconfig application = <{IP6TO4|PPTP|ESP|IKE|SIP|
JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|ILS|H245|
H323|IRC|GAME(UDP)|CONE(UDP)|LOOSE(UDP)|FTP}>
[trace = <{disabled|enabled}>]
[timeout = <number{0-32000}>]
[childqos = <{DSCP|Interactive|Management|
Video|VoIP-RTP|VoIP-Signal|default}>]
[floating = <{disabled|enabled}>]
[proxy = <{disabled|enabled}>]
[tracelevel = <number{1-4}>]
[SIP_ALG = <{disabled|enabled}>]
[RTP_predict_for_term_SIP_ALG = <{disabled|
enabled}>]
where:
application The name of a CONN/NAT application helper as
listed by ':connection applist'.
REQUIRED
trace Enable/disable CONN/NAT application helper
traces.
OPTIONAL
timeout The maximum timeout in seconds to keep
predicted child connections around.
OPTIONAL
childqos Used QOS label for the predicted child
connections.
OPTIONAL
floating Enable/disabled floating port for IKE helper. OPTIONAL
proxy Enable/disable FTP proxy support. OPTIONAL
tracelevel SIP trace level: 1=feature errors; 2=feature
traces; 3=all errors; 4=all traces.
OPTIONAL
SIP_ALG SIP only: enable/disable traditional sip alg
behaviour
OPTIONAL
RTP_predict_for_term_SIP_ALG SIP only: enable/disable RTP connection
prediction for terminated SIP
OPTIONAL