THOMSON TG605s - Xdsl Debug Rloopback

xdsl Commands
E-DOC-CTC-20080409-0002 v2.0
957
xdsl debug rloopback
Configure Remote Loopback (applies to CO mode only).
SYNTAX:
xdsl debug rloopback enabled = <{no|yes}>
[timeout = <number{0-1000}>]
[type = <{cpe|repeater}>]
where:
enabled Enable / disable the Remote Loopback. REQUIRED
timeout Remote Loopback timeout: 0..1000 (min). OPTIONAL
type Remote Loopback type. OPTIONAL