nat Commands
E-DOC-CTC-20080409-0002 v2.0
689
nat Commands
nat config Modify global NAT configuration. see page 690
nat flush Flush current NAT configuration. see page 691
nat ifconfig Modify address translation on an IP
interface.
see page 692
nat iflist Display all interfaces. see page 693
nat mapadd Add an address mapping to a nat
enabled interface.
see page 694
nat mapdelete Delete an address mapping from a
nat enabled interface.
see page 695
nat maplist Display address mappings. see page 696
nat tmpladd Add an address mapping template. see page 697
nat tmpldelete Delete an address mapping template. see page 699
nat tmplinst Instantiate address mapping
templates for a given dynamic
address.
see page 700
nat tmpllist Display address mapping templates. see page 701
To Next Page
Loading...
