THOMSON TG605s - Atm Bundle Ifconfig

atm Commands
E-DOC-CTC-20080409-0002 v2.0
45
atm bundle ifconfig
Configure an interface from a bundle.
SYNTAX:
atm bundle ifconfig name = <{}>
intf = <{}>
[state = <{disabled|enabled}>]
[low = <number{0-15}>]
[high = <number{0-15}>]
where:
name The name of the bundle. REQUIRED
intf The name of the ATM interface. REQUIRED
state Enable/disable interface. OPTIONAL
low The low selector value. OPTIONAL
high The high selector value. OPTIONAL