eth Commands
302
E-DOC-CTC-20080409-0002 v2.0
eth bridge macadd
Add a static MAC address to a bridge interface.
SYNTAX:
eth bridge macadd [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|Internet_8_35|Internet_0_35|eth-br-
dsl}>
hwaddr = <hardware-address>
[vlan = <{default|wan|dmz|guest}>]
where:
brname The name of a bridge instance. OPTIONAL
intf The name of the bridge interface. REQUIRED
hwaddr The ethernet MAC address of the new entry. REQUIRED
vlan The VLAN. OPTIONAL
To Next Page
Loading...
