THOMSON TG605s - Snmp Ifdelete

snmp Commands
806
E-DOC-CTC-20080409-0002 v2.0
snmp ifdelete
Delete an SNMP interface.
SYNTAX:
snmp ifdelete intf = <{loop|ethif1|ethif2|ethif3|ethif4|
ceoc|bridge|OBC|ethport1|RELAY|Internet_0_35|
eth-br-dsl|eth_wan1|eth_dmz1|eth_guest1|lan1|
wan1|dmz1|guest1}>
where:
intf The name of the SNMP interface. REQUIRED