firewall Commands
E-DOC-CTC-20080409-0002 v2.0
407
firewall config
Display/Modify firewall configuration.
SYNTAX:
firewall config [state = <{disabled|enabled}>]
[keep = <{disabled|enabled}>]
[tcpchecks = <{none|fast|exact}>]
[udpchecks = <{disabled|enabled}>]
[icmpchecks = <{disabled|enabled}>]
[logdefault = <{disabled|enabled}>]
[logthreshold = <{disabled|enabled}>]
[tcpwindow = <number{0-1073725440}>]
where:
state Disable/Enable the firewall. OPTIONAL
keep Disable/Enable keeping existing connections
when firewall rules change.
OPTIONAL
tcpchecks Select level of TCP checks. OPTIONAL
udpchecks Disable/Enable UDP checks. OPTIONAL
icmpchecks Disable/Enable ICMP checks. OPTIONAL
logdefault Disable/Enable logging of default firewall rule. OPTIONAL
logthreshold Disable/Enable log thresholding. OPTIONAL
tcpwindow Modify the tcpwindow for fast TCP checks OPTIONAL
To Next Page
Loading...
