eth Commands
282
E-DOC-CTC-20080409-0002 v2.0
eth bridge filter fwdintfadd
Add Forwarding interface: filter action.
SYNTAX:
eth bridge filter fwdintfadd brname = <{bridge}>
name = <{}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|Internet_8_35|Internet_0_35|eth-br-
dsl}>
where:
brname The name of an bridge. REQUIRED
name The name of the filter to configure. REQUIRED
intf The name of the bridge interface to add. REQUIRED
To Next Page
Loading...
