THOMSON TG605s - Mbus Client Register

mbus Commands
644
E-DOC-CTC-20080409-0002 v2.0
mbus client register
Register cli client to mbus
SYNTAX:
mbus client register [dmtree = <{igd|atomic|system}>]
[type = <{indexpath|keystrpath}>]
[dlink = <{local_ipc|remote_inet}>]
[mbusd_addr = <quoted string>]
[refresolv = <{disabled|enabled}>]
[state_events = <{disabled|enabled}>]
where:
dmtree Select mbusd datamodel tree. OPTIONAL
type Path type (default = indexpath) OPTIONAL
dlink Daemon link (default = local_ipc) OPTIONAL
mbusd_addr Daemon address (ip addr for inet) OPTIONAL
refresolv Use reference resolving (default=disabled) OPTIONAL
state_events Context should be notified when the MBus state
changes (default=disabled)
OPTIONAL