tls Commands
E-DOC-CTC-20080409-0002 v2.0
885
tls acs-client config
Display/modify tls settings
SYNTAX:
tls acs-client config [state = <{disabled|enabled}>]
[auth-serv = <{disabled|enabled}>]
[valid-date = <{disabled|enabled}>]
[valid-domain = <{disabled|enabled}>]
where:
state SSL/TLS client for ACS state OPTIONAL
auth-serv Request server authentication OPTIONAL
valid-date Check certificate validity date OPTIONAL
valid-domain Check certificate domain OPTIONAL
To Next Page
