THOMSON TG605s - Eth Bridge Vlan Ifadd

eth Commands
314
E-DOC-CTC-20080409-0002 v2.0
eth bridge vlan ifadd
Add bridge interface to virtual LAN.
SYNTAX:
eth bridge vlan ifadd name = <{default|wan|dmz|guest}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|Internet_8_35|Internet_0_35|eth-br-
dsl}>
[untagged = <{disabled|enabled}>]
where:
name The VLAN name. REQUIRED
intf The name of the bridge interface to add to the
VLAN.
REQUIRED
untagged Enable/disable interface as untagged for this
VLAN.
OPTIONAL