THOMSON TG605s - System Dst

system Commands
E-DOC-CTC-20080409-0002 v2.0
857
system dst
Set daylight saving values
SYNTAX:
system dst [status = <{Disable|Enable}>]
[mode = <{Absolute|Relative}>]
[startdate = <dd/mm/yyyy>]
[starttime = <hh:mm:ss>]
[enddate = <dd/mm/yyyy>]
[endtime = <hh:mm:ss>]
[startweekday = <{Sunday|Monday|Tuesday|
Wednesday|Thursday|Friday|Saturday}>]
[starthour = <number{0-23}>]
[startweek = <number{1-5}>]
[startmonth = <number{1-12}>]
[endweekday = <{Sunday|Monday|Tuesday|
Wednesday|Thursday|Friday|Saturday}>]
[endhour = <number{0-23}>]
[endweek = <number{1-5}>]
[endmonth = <number{1-12}>]
where:
status Set daylight saving status OPTIONAL
mode Set daylight saving mode OPTIONAL
startdate Set the start date of the daylight saving in the
absolute mode
OPTIONAL
starttime Set the start time of the daylight saving in the
absolute mode
OPTIONAL
enddate Set the end date of the daylight saving in the
absolute mode
OPTIONAL
endtime Set the end time of the daylight saving in the
absolute mode
OPTIONAL
startweekday Set the start weekday of the daylight saving in
the relative mode
OPTIONAL
starthour Set the start hour of the daylight saving in the
relative mode
OPTIONAL
startweek Set the start week of the daylight saving in the
relative mode
OPTIONAL
startmonth Set the start month of the daylight saving in the
ralative mode
OPTIONAL